Donut 22 SE RED – DIR set

480.00

Sku: T-12085-02
Categories:
Brand: TecLine

Description

The Donut 22 SE RED wing by Tecline is an award winning design that features a 22 kg (50lb/216N) lift capacity and is suitable for twin-sets of 2×12 litre and 2×15 litre cylinders. Tecline SE wings have a double-layer construction with a heavy duty outer layer made of Nylon 1000D which is snag and tear resistant and an inner bladder made from nylon 840 which is resistant to aging and cracking and is accessable via a quality YKK zip.  The wings are a modern irregular circle design that provides for a better horizontal trim and easier routing options for hoses. It also the added advantage of providing a higher upright position when on the surface.  The dump valve is located on the lower left side in an intuitive position. 
The Stainless Steel back plate is made from 3mm mirror finish stainless steel and includes a cinch adapter on the left side for quick waist band adjustment when donning and doffing. The set also includes velcro tabs to hold the wing and backplate together when removed from the twin set of tanks.
The DIR harness is made from a tough yet flexible 50mm webbing and includes two shoulder D-rings, a left side D-ring for a stage, rubber band keepers to ensure that webbing ends are kept neat (not a catch hazard) and a quality stainless steel buckle. The harness has plenty of webbing length, able to be customised for divers of all sizes. The harness also includes a 50mm crotch strap with both a rear D-ring for accessories and front D-ring for connecting to a DPV.
The set  included:
  • Double layer construction wing (heavy duty 1000D nylon as the outer layer and nylon 840 for the inner layer that is resistant to aging and cracking).
  • 3mm Stainless Steel Backplate.
  • DIR (webbing only) harness 
  • 1 x additional 30cm corrugated inflator hose included.
  • 1 x Proflex LP inflator hose is also included.
The set does not contain:
  • Set of Regulators
  • Set of cylinders
The set is fitted with a standard length 40cm corrugated inflator hose but a shorter length 30cm corrugated hose is provided with the BCD if you wish to swap it.
The back plate and harness system may also be fitted with an optional back pad (with SMB pocket).
The Donut 22 wing is also available in a Rebreather (RB) version.

Additional information

Weight 5.5 kg

Reviews

There are no reviews yet.

Be the first to review “Donut 22 SE RED – DIR set”

Your email address will not be published.